SPY 2 Way Motorcycle Alarm System Full Anti-hijacking Kit Remote Start Security Alarm for Anti-theft Remote Control

1. Sound/flash alarm—When an alarm is triggered, not only does the horn sound, but the LED indicator light will also flash.

2. Silent alarm mode setting—If you don't want any sound during the alarm, you can set the mute mode.

3. Built in Shock sensor—In the anti-theft state, the Shock sensor triggers the alarm for the first time, and the host horn sounds and the direction lights flash synchronously, and the vehicle cannot start.

4. External Microwave sensor—In the anti-theft state, the microwave sensor detects continuous movement of objects or people for 5 seconds, the host horn sounds, and the vehicle cannot start.

5. Illegal ACC ON triggered—In the anti-theft state, forcibly starting the vehicle (with Acc set to ON), the host horn sounds and the direction lights flash, and the vehicle cannot start.

6. Siren pause—In the anti-theft state, press the "lock" button on the remote control to pause the alarm.

7. Disarm—In the anti-theft state, press the "unlock" button once, the anti-theft system will exit the alert state and the alert will be lifted.

8. Alarm Reminding—After parking and turning off the engine for 8 seconds, if anti-theft is not set, the host horn will emit a warning sound and the direction lights will flash three times to remind the owner to set anti-theft.

9. Anti-hijacking—When the vehicle is in motion, press the "lock" button for 2 seconds or more, then the car lights will flash and enter the anti robbery mode.

10. Remote start engine—When the engine is parked and turned off, press the "start button" twice within three seconds to automatically start the vehicle.

11. Remote cut off engine—In remote start mode, press the "unlock" button once to turn off the vehicle.

12. Re-alarm automatically (false disarm)—In the anti-theft state, press the "unlock" button to release the alert. If the vehicle is not driven within 25 seconds, the anti-theft system will be considered as mistakenly released and will automatically return to the original anti-theft alert state.

13. Remote car finding—Short press the "car finding" button on the remote control, the host horn will sound for 10 seconds, the direction lights will flash, and the vehicle's location will be notified through sound and light prompts; Long press the "car finding" button on the remote control, the host horn will not sound, the direction lights will flash, and the light will indicate the location of the vehicle.

14. Power off memory—After the anti-theft system is powered off, regardless of the duration, it will return to the pre power off state after being powered on again.

15. Emergency disarm—In the alarm state, if the remote control is lost or damaged, please turn the motorcycle key from OFF-ON repeatedly for 10 times and leave the key at ON position for 2 seconds or more to disarm.

16. LED indicator—After setting the alarm, the LED indicator flashes twice every 2 seconds to indicate to the car owner that it has entered the anti-theft alert state.

17. Sensing reminding—After setting the alarm, if the remote control does not receive a signal from the host within about 3 minutes, the antenna indicator bar on the display screen will disappear, indicating that the remote control is outside the alarm receiving range.

18. Special music reminding—If no response when pressing the buttons, it will remind the operator with music. That means the remote control is trying to connect the host unit, please try it again later.

19. Power status indication—When remote control battery power is weak, pressing any button on the remote control will emit a sound to remind weak power.

20. Looking for transmitter and charging—When remote control battery power is under 1.1V, the charging indicator will flash.

21. TIME, ALARM SETTING—Press the button “lock” and “unlock” the same time for 1 second, you can set the time and alarm.

22. Remote control adjustable Shock sensor sensitivity—When the anti-theft is disarmed, long press the "unlock" button to enter the vibration sensitivity adjustment setting, and press the "lock" button to adjust.

23. Code learning—Keep pressing the code learning switch, the LED will light on. Enter matching mode, and you can match the remote control for the host.